The EAST-500 Access Control Panel is designed for use by authorized
personnel with specific security codes. It allows authorized users
to change settings such as detection Program and Sensitivity.
Security of the detector’s settings is maintained with a
non-resettable sequence code, which indicates every attempt at
access to the settings. A tamper alarm sounds within 10 seconds
after the Access Touchpad is pressed, unless a proper access code
Electronic Current: AC110V-220V / 50 Hz
Power: less than 35 W
Weight: about 65 KG
Work Environment: under 20 centigrade and 65 centigrade
EAST-500 is easily assembled with only 4 (four) pieces d 8 (eight)
screws and simple to follow instructions
The EAST-500 uses microprocessors in both detection and control
circuits to ensure enhanced sensitivity and programming flexibiity.
The EAST-500 offers an almost infinite number of precise and
resettable program/sensitivity settings, enabling it to respond
more effectively to weapons while ignoring harmless objects.
Uniform detection from archway to floor meets the demanding needs
of today’s security professionals around the world.
Garrett’s EAST-500 is easily assembled with only 4 (four) pieces d
8 (eight) screws and simple to follow instructions
Overhead Control Unit
LCD display, alarm lights, LED bar graphs and control touchpads
plus all wiring, connections and electronics are integrated into a
single overhead compartment which eliminates exposure of wires and
external control box.
Audible and Visual Alarms
Audible and visual alarms are activated when a target amount of
metal is detected; LED bar graph indicates the amplitude of the
Digital controlled pulse induction technology—powered by
microprocessors—is utilized in detection and control circuitry. The
EAST-500 is design. Six detect area.
Rugged, yet lightweight design for simple maintenance and quick,
easy portability; MagnaDolly accessory also available.
Improves analysis of detection signal; increases throughput; helps
eliminate “false alarms” and also provides accurate traffic
Ready light indicates unit is operational; alarm lights and audible
alarms are activated when the target amount of metal is detected;
LED bar graph indicates amplitude of alarm signal.
Built-in and resettable with current reading available on LCD