33Z WALK THROUGH METAL DETECTOR
Easy Self Assembly
The -33Z ( LCD, 33 zone ) modular design allows for a quick and easy
assembly of its 4 sub-assemblies using only 8 screws and 3 internal
electrical connections. This can easily be done in situ by two
Pinpoint Detection Zones
There are 33 Distinct Pinpoint Detection Zones on the -33Z ( LCD, 33 zone ) for full target coverage on the left, centre and
right side of the body from head to toe. The sensitivity on the 6
vertical zones can be set individually to target any part of the
Entry Pacing Lights
On the front of the archway on both legs are two traffic light
style pacing lights. They are internationally recognized symbols at an easy to view eye level and help to control any
queues that may form.
Overhead Control Unit
The main control panel is housed in the overhead control unit. This
houses the LCD display, alarm lights, LED bar graphs and the
control touch pads. All of the wiring, connections and electronics
are integrated into the overhead unit which is lockable for security.
The control touchpad is also lockable to prevent any unauthorised
Multi-dimensional Coil Design
The -33Z ( LCD, 33 zone ) is exclusive multi-dimensional coil design provides unmatched
detection of potentially lethal metal items such as guns, knives
and other flat and rod-shaped weapons regardless of location and
Audible and Visual Alarms
There is an audible alarm as well as visual LED lights signal when
a target has been detected. The Pinpoint lights on the back of the
archway will show where on the body any offending object may be.
The -33Z ( LCD, 33 zone )’s Access Control Panel is designed for
use by authorized personnel with specific, multi-level security
codes. It allows authorized users to change settings such as
detection Program and Sensitivity. Security of the detector's
settings is maintained with a non-resettable sequence code, which
indicates every attempt at access to the settings. A tamper alarm
sounds within 10 seconds after the Access Touchpad is pressed,
unless a proper access code is entered. This can be backed up by
the use of a key to operate the touchpad.
The -33Z (LCD, 33 zone) maintains all settings even when
disconnected from power and does not require recalibration each
time the unit is turned OFF and back ON. No battery is required for
memory retention. While the unit is in operation, a self-test of
all systems is performed continuously with any failures or problems
immediately reported on the LCD display.
1) Operating Temperatures
-20°C to + 70°C; Humidity: To 95% non-condensing
2) Power Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 5 watts;
no rewiring, switching or adjustments required.
3) Weatherproofing / Foreign Object Protection Standards
Meets IP 55, IEC Standard. "Degrees of Protection provided by
Enclosures," IEC 529.
All settings are secured with a key lock and two levels of access
codes. Further security is accomplished with a cabinet lock which
prevents unauthorized access to physical cables, connectors and
5) Control Outputs
Solid state switches (low voltage AC or DC) for operating external
alarms and control devices.
6) Traffic Counter
Counter tracks the number of patrons that have passed through the
detector, the number of alarms and calculates alarm percentage.
Dual channels and DSP circuitry allow several -33Z’s to operate
simultaneously in close proximity to one another.
8) Interference Suppression
DSP built-in circuitry eliminates effects from x-ray monitors and
other potential electrical interference sources.
Sixteen (16) independent programs designed to meet all
installation-specific requirements including the new TSA Enhanced
Metal Detector (EMD) System requirements for airports.
Audible tone and volume adjustable. Bright LED visual alarm
11) Target Pinpointing Lights
Thirty-three distinct zones are displayed with two independent
columns of LED's located on exit side of the gate.
(1) Overall sizes (mm): 2240 (height) x 900 (width) x 580(depth)
(2) Size of alley (mm): 2240 (height) x 760 (width) x 580 (depth)